14 Wide Continuous Residential Trench Drain
PolyDrain Trench Drain System
The PolyDrain polymer concrete trench drain system is well suited to a wide variety of surface drainage applications. The ABT PolyDrain precast trench drain system provides modular design flexibility, facilitates construction accuracy, requires less installation labor and skill, and has lower installed cost when compared to conventional hand-formed cast-in-place methods of creating trench drains.
PolyDrain polymer concrete non-sloped or pre-sloped trench drain system components have superior chemical resistance, greater strength, lower water absorption, and better freeze/thaw resistance than does Portland cement concrete. Polymer concrete is not degraded by salt, oil, most acids and alkalis, and offers UV resistance. These polymer concrete properties make ABT PolyDrain trench drains excellent for capturing, containing, and transporting surface runoff in any drainage application.
The standard 4 Inch (100mm) PolyDrain trench drain system contains both pre-sloped and non-sloped drain channels, grates, frames, catch basins, channel end plates, installation aids, and all other trench drain components to provide a complete precast channel drain solution.
By virtue of a smooth interior finish, radius bottom, and built-in 0.6% slope, flow velocities of 1 meter/second (3.5 feet/second) are attained inside ABT PolyDrain trench drain channels even in flat grade conditions. The higher hydraulic flow velocity and smooth surface reduces debris build-up in the precast polymer concrete drain channels in comparison to cast-in-place trench drain construction.
Also included in the PolyDrain precast trench drain system are Special Products for liquid containment applications, utility trenches, and limited-space installations. The PolyDrain system provides an optimized solution for any application.
The PolyDrain precast trench drain system is manufactured by ABT Inc., the industry leader in modular drainage systems for commercial and industrial use.
PolyDrain System Drawings
| Description | Units | Details (.dwg) |
| PolyDrain System Components Schematic | English Units (inch) | |
| PolyDrain System Components Schematic | Metric Units | |
| Grate Details and Specifications | |||
|---|---|---|---|
Solid Cover Steel - Ductile Iron Grates | |||
| Image | Part Number | Additional Info | Documents |
 | 2501 | Load Class: G Material: Ductile Iron - Black Polymer Length (in): 19.6 Locking Device: 811B | Detail Sheet:   Spec Sheet:  |
Perforated Heel-Safe Grates | |||
| Image | Part Number | Additional Info | Documents |
 | 2410 / 2411 | Load Class: A Material: Galv. Steel Length (in): 39.2/19.6 Locking Device: 810A | Detail Sheet: Spec Sheet: |
| 2452 / 2453 | Load Class: A Material: Stainless Steel Length (in): 39.2/19.6 Locking Device: 840A | Detail Sheet: Spec Sheet: | |
 | 2486 / 2487 | Load Class: B Material: Brass Length (in): 39.2/19.6 Locking Device: 892A | Detail Sheet: Spec Sheet: |
Reinforced Perforated Heel-Safe Grates | |||
| Image | Part Number | Additional Info | Documents |
 | 2412 / 2413 | Load Class: C Material: Galv. Steel Length (in): 39.2/19.6 Locking Device: 810A | Detail Sheet: Spec Sheet: |
| 2412.19 / 2413.10 | Load Class: D Material: Galv. Steel Length (in): 39.2/19.6 Locking Device: 810A | Detail Sheet: Spec Sheet: | |
| 2454 / 2455 | Load Class: C Material: Stainless Steel Length (in): 39.2/19.6 Locking Device: 840A | Detail Sheet: Spec Sheet: | |
| 2454.19 / 2455.10 | Load Class: D Material: Stainless Steel Length (in): 39.2/19.6 Locking Device: 840A | Detail Sheet: Spec Sheet: | |
Slotted Steel Grates | |||
| Image | Part Number | Additional Info | Documents |
 | 2420 / 2421 | Load Class: B Material: Galv. Steel Length (in): 39.2/19.6 Locking Device: 811A | Detail Sheet: Spec Sheet: |
| 2440 / 2441 | Load Class: B Material: Stainless Steel Length (in): 39.2/19.6 Locking Device: 841A | Detail Sheet: Spec Sheet: | |
Reinforced Slotted Steel Grates | |||
| Image | Part Number | Additional Info | Documents |
 | 2422 / 2423 | Load Class: C Material: Galv. Steel Length (in): 39.2/19.6 Locking Device: 811A | Detail Sheet: Spec Sheet: |
| 2422.19 / 2423.10 | Load Class: D Material: Galv. Steel Length (in): 39.2/19.6 Locking Device: 811A | Detail Sheet: Spec Sheet: | |
| 2442 / 2443 | Load Class: C Material: Stainless Steel Length (in): 39.2/19.6 Locking Device: 841A | Detail Sheet: Spec Sheet: | |
| 2442.19 / 2443.10 | Load Class: D Material: Stainless Steel Length (in): 39.2/19.6 Locking Device: 841A | Detail Sheet: Spec Sheet: | |
Ductile Iron Slotted Grates | |||
| Image | Part Number | Additional Info | Documents |
 | 2502 | Load Class: E Material: Ductile Iron - Black Polymer Length (in): 19.6 Locking Device: 811B | Detail Sheet: Spec Sheet: |
 | 2504 | Load Class: E Material: Ductile Iron - Black Polymer Length (in): 19.6 Locking Device: 811B | Detail Sheet: Spec Sheet: |
Ornamental Ductile Iron Slotted Grates | |||
| Image | Part Number | Additional Info | Documents |
 | 2506 | Load Class: E Material: Ductile Iron - Black Polymer Length (in): 19.6 Locking Device: 810A | Detail Sheet: Spec Sheet: |
 | 2509 "Imperial Star" | Load Class: D Material: Ductile Iron Length (in): 19.6 Locking Device: 810A | Detail Sheet: Spec Sheet: |
 | 2509A "Maze / Meander" | Load Class: D Material: Ductile Iron Length (in): 19.6 Locking Device: 810A | Detail Sheet: Spec Sheet: |
 | 2509B "River Wave" | Load Class: D Material: Ductile Iron Length (in): 19.6 Locking Device: 810A | Detail Sheet: Spec Sheet: |
 | 2509C "Incan Myth" | Load Class: D Material: Ductile Iron Length (in): 19.6 Locking Device: 810A | Detail Sheet: Spec Sheet: |
 | 2509D "Rain Drops" | Load Class: D Material: Ductile Iron Length (in): 19.6 Locking Device: 810A | Detail Sheet: Spec Sheet: |
 | 2509E "Fern" | Load Class: D Material: Ductile Iron Length (in): 19.6 Locking Device: 810A | Detail Sheet: Spec Sheet: |
 | 2509F "Picasso" | Load Class: D Material: Ductile Iron Length (in): 19.6 Locking Device: 810A | Detail Sheet: Spec Sheet: |
 | 2509G "Smooth Stones" | Load Class: D Material: Ductile Iron Length (in): 19.6 Locking Device: 810A | Detail Sheet: Spec Sheet: |
 | 2509H "Regular Joe Heel Safe" | Load Class: D Material: Ductile Iron Length (in): 19.6 Locking Device: 810A | Detail Sheet: Spec Sheet: |
 | 2509J "Gears" | Load Class: D Material: Ductile Iron Length (in): 19.6 Locking Device: 810A | Detail Sheet: Spec Sheet: |
 | 2509L "Ocean Current" | Load Class: D Material: Ductile Iron Length (in): 19.6 Locking Device: 810A | Detail Sheet: Spec Sheet: |
 | 2509P "Regular Joe" | Load Class: D Material: Ductile Iron Length (in): 19.6 Locking Device: 810A | Detail Sheet: Spec Sheet: |
Ornamental Ductile Iron Slotted Grates with Frame | |||
| Image | Part Number | Additional Info | Documents |
 | 2516 | Load Class: E Material: Ductile Iron - Black Polymer Length (in): 19.6 Locking Device: 810AXL | Detail Sheet: Spec Sheet: |
 | 2519 "Imperial Star" | Load Class: D Material: Ductile Iron Length (in): 19.6 Locking Device: 810AXL | Detail Sheet: Spec Sheet: |
 | 2519A "Maze / Meander" | Load Class: D Material: Ductile Iron Length (in): 19.6 Locking Device: 810AXL | Detail Sheet: Spec Sheet: |
 | 2519B "River Wave" | Load Class: D Material: Ductile Iron Length (in): 19.6 Locking Device: 810AXL | Detail Sheet: Spec Sheet: |
 | 2519C "Incan Myth" | Load Class: D Material: Ductile Iron Length (in): 19.6 Locking Device: 810AXL | Detail Sheet: Spec Sheet: |
 | 2519D "Rain Drops" | Load Class: D Material: Ductile Iron Length (in): 19.6 Locking Device: 810AXL | Detail Sheet: Spec Sheet: |
 | 2519E "Fern" | Load Class: D Material: Ductile Iron Length (in): 19.6 Locking Device: 810AXL | Detail Sheet: Spec Sheet: |
 | 2519F "Picasso" | Load Class: D Material: Ductile Iron Length (in): 19.6 Locking Device: 810AXL | Detail Sheet: Spec Sheet: |
 | 2519G "Smooth Stones" | Load Class: D Material: Ductile Iron Length (in): 19.6 Locking Device: 810AXL | Detail Sheet: Spec Sheet: |
 | 2519H "Regular Joe Heel Safe" | Load Class: D Material: Ductile Iron Length (in): 19.6 Locking Device: 810AXL | Detail Sheet: Spec Sheet: |
 | 2519J "Gears" | Load Class: D Material: Ductile Iron Length (in): 19.6 Locking Device: 810AXL | Detail Sheet: Spec Sheet: |
 | 2519L "Ocean Current" | Load Class: D Material: Ductile Iron Length (in): 19.6 Locking Device: 810AXL | Detail Sheet: Spec Sheet: |
 | 2519P "Regular Joe" | Load Class: D Material: Ductile Iron Length (in): 19.6 Locking Device: 810AXL | Detail Sheet: Spec Sheet: |
Ductile Iron Grates With Anchor Frame | |||
| Image | Part Number | Additional Info | Documents |
 | 2512 | Load Class: E Material: Ductile Iron Length (in): 19.6 Locking Device: 815B | Detail Sheet: Spec Sheet: |
 | 2514 | Load Class: E Material: Ductile Iron Length (in): 19.6 Locking Device: 815B | Detail Sheet: Spec Sheet: |
Transportation Series – 500 Series Grates | |||
| Image | Part Number | Additional Info | Documents |
 | 2542 | Load Class: E Material: Ductile Iron Length (in): 19.6 Locking Device: Integrated | Detail Sheet: Spec Sheet: |
 | 2552 | Load Class: E Material: Ductile Iron Length (in): 19.6 Locking Device: Integrated | Please use 2542 documents |
 | 2564 | Load Class: E Material: Ductile Iron Length (in): 19.6 Locking Device: Non-Removable | Detail Sheet: Spec Sheet: |
 | 2532B | Load Class: G Material: Ductile Iron Length (in): 19.6 Locking Device: Integrated | Detail Sheet: Spec Sheet: |
Heavy Duty Industrial Stainless Steel Grates | |||
| Image | Part Number | Additional Info | Documents |
 | 2468 Grate Only | Load Class: D Material: Stainless Steel Length (in): 19.6 Locking Device: 468.SSHD | Detail Sheet: Spec Sheet: |
Fiberglass Grates | |||
| Image | Part Number | Additional Info | Documents |
 | 2720 / 2721 | Load Class: B Material: Vinylester FRP Length (in): 39.2/19.6 Locking Device: 887 | Detail Sheet: Spec Sheet: |
 | 2722 / 2723 | Load Class: D Material: Vinylester FRP Length (in): 39.2/19.6 Locking Device: 887 | Detail Sheet: Spec Sheet: |
Thermoplastic Grates | |||
| Image | Part Number | Additional Info | Documents |
 | 2336 | Load Class: A Material: Thermoplastic Length (in): 19.6 Locking Device: 840.25A | Detail Sheet: Spec Sheet: |
| PolyDrain Accessories | |||
|---|---|---|---|
Catch Basins | |||
| Image | Part Number | Additional Info | Documents |
 | 2900 | Notes: ► Up to 15″ pipe connection ► Supports sidewall extensions Optional Items: | Detail Sheet: |
 | 2902 | Notes: 2900 Catch Basin with Foul Air Trap | |
 | 2903 | Material: Galv. Steel | |
| 2904 | Material: Stainless Steel | ||
 | 2610 | Detail Sheet: Spec Sheet: | |
 | 2611 | Detail Sheet: Spec Sheet: | |
 | 2605 | Inset: 2610 Catch Basin Material: Galv. Steel | |
| 2607 | Inset: 2611 Catch Basin Material: Galv. Steel | ||
| 2608 | Inset: 2610 Catch Basin Material: Stainless Steel | ||
| 2609 | Inset: 2611 Catch Basin Material: Stainless Steel | ||
Inlets, Outlets, and Endcaps | |||
| Image | Part Number | Additional Info | Documents |
 | Horizontal Outlets: | 4" SDR 35 | |
| 4" SCH 40 | |||
| 6" SDR 35 | |||
| End Caps: | all channel sizes available | ||
 | Vertical Outlets: | 4" PVC | |
| 4" Ductile | |||
| 6" PVC | |||
| 8" PVC | Installation Instructions: | ||
| 12" PVC | Installation Instructions: | ||
Overlay Rails | |||
| Image | Part Number | Additional Info | Documents |
 | 2459G | Material: Galv. Steel | |
| 2459 | Material: Stainless Steel | ||
| 2459B | Material: Brass | ||
Sidewall Extensions | |||
| Image | Part Number | Additional Info | Documents |
 | 2301 | Notes: ► 7" height ► 30 Meter continuous slope extension | |
 | 2381 | Notes: ► 14" height ► 60 Meter continuous slope extension (when combined with 2301 sidewalls) | |
Installation Devices | |||
| Image | Part Number | Additional Info | Documents |
 | 2224 | Notes: Requires two rebar stakes (not included) | |
| | 2224.2 | Notes: ► Optional Story Pole Available ► Requires two rebar stakes (not included) | Installation Instructions: |
PolySeal Adhesive-Sealants | |||
| Image | Part Number | Additional Info | Documents |
 | 3233 | Material: Polyurethane Notes: General purpose sealant formulated for PolyDrain® channels | |
 | 3234-04 | Material: Two-Part Epoxy Notes: ► Permanently Flexible ► Requires Dual Cartridge Caulk Gun ► Static mixing tube included | |
| 3235 | Dual Cartridge Caulk Gun | ||
| 3236 | Additional Nozzle for Polyseal 4 or 5 | ||
Maintenance Items | |||
| Image | Part Number | Additional Info | Documents |
 | PJ306K | Ideal For: ► Veterinary Clinics and Kennels ► High Silt and Debris Areas | Installation Instructions: |
 | 2231 | Notes: ► Shovel conforms to PolyDrain® channel radius ► Fits Standard Shovel Replacement Handle (not included) | |
 | 2553 | Notes: ► Covers grates during installation to keep system clean ► 100 ft per roll | |
Source: https://abtdrains.com/products/precast-trench-drain/polydrain/
Post a Comment for "14 Wide Continuous Residential Trench Drain"